The Sandia 50-1000 Spot-Xtract Commercial extractor has a 3-gallon recovery tank, a 7-foot long cleaning hose, and a 4-inch wide clear plastic cleaning wand for water extraction carpet and upholstery cleaning of small areas. The electric motor delivers 76 inches of water lift suction for thorough water extraction. The extractor recovers dirty water in a 3-gallon tank that can be removed from the base unit for emptying. The 7 ft. hose allows for cleaning without moving the machine, with enough reach for stairs, upholstery, and auto detailing. The 4-inch wide cleaning wand is made of clear plastic to show dirt as it is extracted, and has a built-in spray jet to deliver cleaning solution at 55 lb. per square inch (psi), and the extractor uses brass quick-connect host fittings for quick setup of the solution spray hose. It has 3 inch diameter polyurethane rear wheels and an extending handle for maneuverability during use. The extractor body and tanks are made of roto-molded polyethylene for chemical and corrosion resistance.

Specifications

Carpet extractors clean carpets and upholstery by applying water (or a water and detergent mixture), and then vacuuming it up. Some cleaners use a brush roll agitator to loosen dirt. The used cleaning solution and dirt are vacuumed into a recovery tank for disposal. Carpet extractors are available as upright, walk-behind units with a wide cleaning path, or canister units that use hose and wand attachments that require less movement of the base unit. Some upright units can work with hose and wand attachments for cleaning upholstery and stairs. Water lift measures the strength of the suction produced by a vacuum’s motor; more inches indicate stronger suction, which is the result of both a powerful motor and efficient and well-sealed air pathways.

Sandia Products manufactures floor and carpet care equipment such as extractors, vacuums, and air movers. The company, founded in 1996, is headquartered in Huntington Beach, CA.